Joan’s advices Final steps on paint works. I last post I wrote about the problems with the table lack: final layers suffered of cracking. After a talk with a Joan, who has a large experience as professional car painter and always has time to help a friend, he diagnosed the problem: layers incompatibility. He gave me a kinda of principles to follow when painting machines. I want to share then here:

Continue reading

Painting works are coming to the end. Last days I finally got some lack cans to do the final coating. Not an easy task due to COVID'19 lock down. I sprayed most the prepared parts and this is the result: Overall, the finish quality is really good. The enamel used is of semi-gloss sheen and gives a really silky touch to the surface. As I mentioned in the previous post, the base suffered of cracking defects that worsened as the layers become drier (it lasts about three days to fully dry).

Continue reading

The Wörner B13 has a notable building quality. It’s not cheap machine at all. After the disassembly, al mechanical elements were cleaned of debris and this olde grease that forms a kind of hard lack with years. Surely, the machine was serviced before: there are traces of poor repairing and assembly. I’m not sure, however, that it was also cleaned and relubed. Grease looks very old in some bearings. What follows are some detailed pictures of the distinct assemblies after cleaning the parts.

Continue reading

During the COVID'19 lockdown I spent part of my time disassembling the drilling press. In this post I will show the cosmetic works. The machine arrived with a nasty layer of lack over the original one. I decided to spend time recovering its original aspect. This required to strip off all the paint in bad condition and tp prepare the surface to be lackered again. In some parts, like the pulleys cover, I go until the bare metal.

Continue reading

The first work we do is a specific cabinet to support the drill press, to protect the electrical wiring and, to store the drill tooling. The cabinet structure is maid from steel L profile of 50mm conveniently welded. It is mounted on machine feet ans designed to be moved by using the palet jack. Below you will find some pictures of the structure and the drill press being moved on its top.

Continue reading

Some months ago I bought a serious drilling press. I was investigating for months looking for a good quality drill press after The Cincinnati was sold. Finally, I favoured a Wörner B13. Although unusual, it’s a nice and high quality machine. The machine came from Lithuania but they it is made in Germany. The machine condition is good but suffers from aestetical issues and some signs of age. Additionally, someone modified the driving system adding and intermediate pulley to lower the rotation speeds range.

Continue reading